Chapter 2: BIOS information
2-7
C1E Configuration [Disabled]
Allows you to enable or disable C1E Dual-Core related CPU power State. Configuration
options: [Disabled] [Enabled]
2.4.3
Chipset
The
Chipset
menu allows you to change the advanced chipset settings. Select an item then
press
<Enter>
to display the sub-menu.
NorthBridge Configuration
Memory Configuration
Bank Interleaving [Auto]
Allows you to enable the bank memory interleaving.
Configuration options: [Disabled] [Auto]
Channel Interleaving [Disabled]
Allows you to enable the channel memory interleaving.
Configuration options: [Disabled] [Address bits 6] [Address bits 12]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]
Enable Clock to All DIMMs [Disabled]
Enables or disables clock to all DIMMs. Configuration options: [Disabled] [Enabled]
MemClk Tristate C3/ATLVID [Disabled]
Enables or disables the MemClk Tristate C3/ALTVID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Enables or disables the memory remapping around memory hole.
Configuration options: [Disabled] [Enabled]
DCT Unganged Mode [Auto]
Allows you to enable or disable Unganed mode.
Configuration options: [Auto] [Always]
Power Down Enable [Enabled]
Enables or disables the DDR power down mode.
Configuration options: [Disabled] [Enabled]
ECC Configuration
ECC Mode [Disabled]
Enables or disables the DRAM ECC that allows the hardware to report and correct
memory errors automatically. Configuration options: [Disabled] [Basic] [Good] [Super]
[Max] [User]
DRAM Timing Configuration
Memory Clock Mode [Auto]
Allows you to set the memory clock mode. Configuration options: [Auto] [Manual]
The following item appears only when the
Memory Clock Mode
item is set to [Manual].
Memclock Value [333 MHz]
Allows you to set the Memclock value. Configuration options: [333 MHz] [400 MHz] [533 MHz]
DRAM Timing Mode [Auto]
Allows you to set the DRAM timing mode. Configuration options: [Auto] [Both]