Asus M4A78-EM - Motherboard - Micro ATX User Manual Download Page 46

Page: 46 / 64

2-4

Chapter 2: BIOS information

2.1.3

ASUS CrashFree BIOS 3 utility

The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file

when it fails or gets corrupted during the updating process. You can update a corrupted BIOS

file using the motherboard support DVD or a USB flash disk that contains the updated BIOS

file.

• Prepare the motherboard support DVD or the USB flash disk containing the updated

motherboard BIOS before using this utility.

• Always connect the SATA cable to the SATA1/2/3/5/6 connector. Otherwise, the utility

will not function.

Bad BIOS checksum. Starting BIOS recovery...

Checking for CD-ROM...

When the BIOS file is found, the utility reads it and starts erasing the corrupted BIOS

file.

Bad BIOS checksum. Starting BIOS recovery...

Checking for CD-ROM...

CD-ROM found!

Reading file “M4A78EM.ROM”. Completed.

Start erasing...

Start programming...

Recovering the BIOS

To recover the BIOS:
1.

Turn on the system.

Insert the support DVD or the USB flash disk containing the BIOS file to the optical

drive or USB port.

The utility displays the following message and automatically checks the support DVD

or USB flash disk for the BIOS file.

• Only the USB flash disk with FAT 32/16 format and single partition supports ASUS

CrashFree BIOS 3. The device size should be smaller than 8GB.

• DO NOT shut down or reset the system while updating the BIOS! Doing so can cause

system boot failure!

Restart the system after the utility completes the updating process.

The recovered BIOS may not be the latest BIOS version for this motherboard. Download

the latest BIOS file from the ASUS website at

www.asus.com.

Summary of Contents for M4A78-EM - Motherboard - Micro ATX

































































Search results

Summary of Contents for M4A78-EM - Motherboard - Micro ATX

Reviews:

Related manuals for M4A78-EM - Motherboard - Micro ATX

Brands by name

Popular brands

Asus M4A78-EM - Motherboard - Micro ATX, User Manual

Search results

Summary of Contents for M4A78-EM - Motherboard - Micro ATX

Reviews:

Related manuals for M4A78-EM - Motherboard - Micro ATX

Brands by name

Popular brands