Chapter 2: BIOS information
2-11
2.4.4
Onboard Devices Configuration
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4][2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Take caution when changing the settings of the PCI PnP menu items. Incorrect field values
can cause the system to malfunction.
Plug and Play O/S [No]
When set to
[No]
, BIOS configures all the devices in the system. When set to
[Yes]
and if
you install a Plug and Play operating system, the operating system configures the Plug and
Play devices not required for boot. Configuration options: [No] [Yes]
2.4.5
PCI PnP
The
PCI PnP
menu items allow you to change the advanced settings for PCI/PnP devices.
The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA
devices, and setting the memory size block for legacy ISA devices.
MAC LAN [Auto]
Allows you to set or disable the onboard LAN. Configuration options: [Auto] [Disabled]
Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the Onboard LAN boot ROM.
Configuration options: [Enabled] [Disabled]
MCP68 SE ACPI HPET TABLE [Enabled]
Allows you to enable or disable the MCP68 SE ACPI HPET TABLE.
Configuration options: [Disabled] [Enabled]
2.4.6
USB Configuration
The items in this menu allows you to change the USB-related features. Select an item then
press
<Enter>
to display the configuration options.
The
Module Version
and
USB Devices Enabled
items show the auto-detected values. If
no USB device is detected, the item shows
None
.
USB Functions [Enabled]
Enables or disables the USB functions. Configuration options: [Enabled] [Disabled]
USB 2.0 Controller [Enabled]
Enables or disables the USB 2.0 Controller. Configuration options: [Enabled] [Disabled]
Summary of Contents for M2N68-AM SE2 - Motherboard - Micro ATX
Page 1: ...Motherboard M2N68 AM SE2 ...
