Asus M2N4-SLI User Manual Download Page 44

Page: 44 / 138

2-24

Chapter 2: Hardware information

2. IDE connector (40-1 pin PRI_IDE, SEC_IDE)

The onboard IDE connector is for the Ultra DMA 133/100/66 signal

cable. There are three connectors on each Ultra DMA 133/100/66

signal cable: blue, black, and gray. Connect the blue connector to the

motherboard’s IDE connector, then select one of the following modes

to configure your device.

• Pin 20 on the IDE connector is removed to match the covered hole

on the Ultra DMA cable connector. This prevents incorrect insertion

when you connect the IDE cable.

• Use the 80-conductor IDE cable for Ultra DMA 100/66 IDE devices.

Drive jumper setting

Mode of

device(s)

Cable connector

Single device

Cable-Select or Master

Black

Two devices

Cable-Select

Master

Black

Slave

Gray

Master

Black or gray

Slave

M2N4-SLI

M2N4-SLI IDE Connectors

PRI_ID

SEC_ID

NOTE:

Orient the red markings

(usually zigzag) on the ID

ribbon cable to PIN 1.

If any device jumper is set as “Cable-Select,” make sure all other device

jumpers have the same setting.

Summary of Contents for M2N4-SLI











































































































































Search results

Summary of Contents for M2N4-SLI

Reviews:

Brands by name

Popular brands

Asus M2N4-SLI, User Manual

Search results

Summary of Contents for M2N4-SLI

Reviews:

Brands by name

Popular brands