D I S A S S E M B L Y P R O C E D U R E
3 -
3 - 9
9
4.
Lift straight up the LCD panel from the system.
Disassembling LCD Module
1.
Remove 3 rubber pads along the lower edge of the LCD module (no. 1) and 3
screws underneath them.
2.
Remove 2 rubber pads along the upper edge of the LCD module (no. 2) and 2
screws underneath them.
3.
Carefully pry the inside edges of the LCD case open on all four edges (no. 3) with
your fingers. Then, lift it away from the LCD module.
4.
Remove 4 screws (no.1, M2.5*6L(B)B-NI).
5.
Disconnect the inverter cable (no. 2) and lift the inverter away from the LCD
module (no. 3).
6.
Remove 4 screws (no.4, M2*3L(K)W-NI) to separate the LCD panel from the
LCD bottom case
7.
Remove the panel from the LCD bottom case and remove 4 screws (no.5,
M2*3L(K) W-NI) on both sides to separate the LCD hinge brackets from the
panel.
L C D D I S -
A S S E M B L Y
No.1
Summary of Contents for L8400
