manualshive.com logo in svg

Asus KGMH-D16 QDR, User Manual, Page: 83 / 152

Share
Download
Asus KGMH-D16 QDR User Manual Download Page 83

ASUS KGN(M)H-D16

4-25

4.4.4 

USB Configuration

The items in this menu allows you to change the USB-related features. Select an 

item then press <Enter> to display the configuration options.

BIOS SETUP UTILITY

 

    

   Advanced

 

USB Configuration

Module Version - 2.24.5-13.4

USB Devices Enabled: 

 

1 Keyboard

Legacy USB Support  

 

[Enabled]

USB 2.0 Controller Mode   

[HiSpeed]

BIOS EHCI Hand-off 

 

[Enabled]

Legacy USB1.1 HC Support   

[Enabled]

Enables support for 

legacy USB. AUTO 

option disables 

legacy support if 

no USB devices are 

connected.

Legacy USB Support [Enabled]

Allows you to enable or disable support for legacy USB devices. Setting to [Auto] 

allows the system to detect the presence of USB devices at startup. If detected, the 

USB controller legacy mode is enabled. If no USB device is detected, the legacy 

USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto]

The following item appears only when you set 

Legacy

 

USB Support

 to 

[Enabled].

USB 2.0 Controller Mode [HiSpeed]

Allows you to set the USB 2.0 controller to HiSpeed (480Mbps) or FullSpeed 

(12Mbps). Configuration options: [FullSpeed] [HiSpeed]

BIOS EHCI Hand-Off [Enabled]

Enables or disables the BIOS EHCI hand-off support. 

Configuration options: [Disabled] [Enabled]

Legacy USB1.1 HC Support [Enabled]

Enables or disables the legacy USB1.1 HC support. 

Configuration options: [Disabled] [Enabled]

Summary of Contents for KGMH-D16 QDR

























































































































































Reviews:

No comments