manualshive.com logo in svg

Asus KGMH-D16 QDR, User Manual, Page: 122 / 152

Share
Download
Asus KGMH-D16 QDR User Manual Download Page 122

6-10

Chapter 6: Driver installation

Red Hat

®

 Enterprise Linux OS 5.0

To install the RAID controller driver when installing Red Hat

 Red Hat

®

 Enterprise OS:

1.  Boot the system from the Red Hat

®

 OS installation CD.

2.  At the 

boot:

, type 

linux dd

3.  Press <Enter>.

ress <Enter>.

-  To install or upgrade in graphical mode, press the <ENTER> key.
-  To install or upgrade in text mode, type: linux text <ENTER>.
-  Use the function keys listed below for more information.

[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]

boot: linux dd

4.  Select 

Yes

 using the <Tab> key when asked if you have the driver disk, then 

press <Enter>.

Main Menu

Do you have a driver disk?

Yes

No

5.  Insert the Red Hat

®

 Enterprise RAID driver disk to the floppy disk drive, select 

OK

, then press <Enter>.

 

The drivers for the RAID card are installed to the system.

Insert Driver Disk

Insert your driver disk into /dev/fd0 

and press “OK” to continue.

OK

Back

Summary of Contents for KGMH-D16 QDR

























































































































































Reviews:

No comments