Asus K8V-XE Page 33 User Manual Download

Page: 33 / 86

ASUS K8V-XE motherboard

1-21

1.10.2 Internal connectors

1. IDE connectors (40-1 pin PRI_IDE, SEC_IDE)

This connector supports the provided UltraATA133 IDE hard disk ribbon

cable. Connect the cable’s blue connector to the primary (recommended) or

secondary IDE connector, then connect the gray connector to the UltraATA133

slave device (hard disk drive) and the black connector to the UltraATA133

master device.

• Follow the hard disk drive documentation when setting the device in master

or slave mode.

• Pin 20 on each IDE connector is removed to match the covered hole on the

UltraATA cable connector. This prevents incorrect orientation when you

connect the cables.

• The hole near the blue connector on the UltraATA cable is intentional.

2. Floppy disk drive connector (34-1 pin FLOPPY)

This connector supports the provided ﬂoppy drive ribbon cable. After

connecting one end to the motherboard, connect the other end to the ﬂoppy

drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables

with pin 5 plug).

K8V-XE IDE Connectors

NOTE:

Orient the red markings

(usually zigzag) on the IDE

ribbon cable to PIN 1.

K8V -XE

K8V-XE Floppy Disk Drive Connector

NOTE:

Orient the red markings on

the floppy ribbon cable to PIN 1.

FLOPPY

PIN 1

K8V -XE

Summary of Contents for K8V-XE























































































Search results

Summary of Contents for K8V-XE

Reviews:

Related manuals for K8V-XE

Brands by name

Popular brands

Asus K8V-XE, User Manual

Search results

Summary of Contents for K8V-XE

Reviews:

Related manuals for K8V-XE

Brands by name

Popular brands