ASUS K8N-LR
2-11
2.4
System memory
2.4.1 Overview
The motherboard comes with four 184-pin Double Data Rate (DDR) Dual
Inline Memory Modules (DIMM) sockets.
The following figure illustrates the location of the sockets:
K8N-LR 184-pin DDR DIMM Sockets
DIMM_A2
80 Pins
104 Pins
DIMM_A1
DIMM_B2
DIMM_B1
K8N-LR
R
Channel
Sockets
Channel A
DIMM_A1 and DIMM_A2
Channel B
DIMM_B1 and DIMM_B2
2.4.2 Memory Configurations
You may install 64 MB, 128 MB, 256 MB, 512 MB, or 1 GB unbuffered ECC
DDR DIMMs into the DIMM sockets using the memory configurations in this
section.
• For dual-channel configuration, the total size of memory module(s)
installed per channel must be the same for better performance
(DIMM_A2=DIMM_B2).
• Due to chipset resource allocation, the system may detect less than
4 GB of system memory when you installed four 1 GB DDR memory
modules.
• When using single channel DDR DIMM modules, install into DIMM_A1
or DIMM_A2 slot only.
• Always install DIMMs with the same CAS latency. For optimum
compatibility, we recommend that you obtain memory modules from
the same vendor. Refer to the DDR400 Qualified Vendors List at the
ASUS web site.
Summary of Contents for K8N-LR
