Asus J3455I-CM-A, Manual

Page: 39 / 54

J3455I-CM-A
3-12
LAN_U32G1_3/4 [Enabled]
Allows you to enable or disable an individual USB port. Configuration options:
[Enabled] [Disabled].
USBE12, USB5/6 [Enabled]
Allows you to enable or disable an individual USB port. Configuration options:
[Enabled] [Disabled].
3.4.7 Platform Trust Technology
The items in this menu allow you to configure the Platform Trust Technology.
TPM Device Selection [Discrete TPM]
This item allows you to select the firmware TPM or discrete TPM.
[Firmware TPM]
Enables PTT in SkuMgr.
[Discrete TPM] Disables PTT in SkuMgr.
When PTT or Discrete TPM is disabled, all the data saved on it will be cleared.
3.4.8 SoC Configuration
OS Selection [Windows]
This item allows you to select the target OS. Configuration options: [Windows] [Linux]
Intel IGD Configuration
This item allows you to select the target OS. Configuration options: [Windows] [Linux]
Primary Display [Auto]
Allows you to select which of the iGPU/PCIE Graphics device should be the Primary
Display. Configuration options: [Auto] [iGD] [PCI-E]
RC6 (Render Standby) [Auto]
Allows you to enable or disable Intel
®
Graphics Render Standby support to reduce
iGPU power use when the system is idle. Configuration options: [Disable] [Enable]
iGPU Memory [64M]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by the
iGPU. Configuration options: [64M] [96M] [128M] [160M] [192M] [224M] [256M] [288M]
[320M] [352M] [384M] [416M] [448M] [512M] [1024M]
iGPU Multi-Monitor [Disable]
Allows you to enable the iGPU Multi-Monitor. Configuration options: [Disable] [Enable]
3.4.9 SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
SATA Controller [Enable]
Allows you to enable or disable the chipset SATA controller. Configuration options: [Enable]
[Disable]