Asus J1800I-A, User Manual

Page: 18 / 62

1-10
Chapter 1: Product introduction
J1800I
-A
1 2 2 3
+5V
(Default)
+5VSB
KBPWR
J1800I-A
Keyboard Power Setting
J1800I
-A
J1800I-A Keyboard and USB device wake up
1 2 2 3
+5V +5VSB
(Default)
USBPWB
J1800I
-A
J1800I-A USB device wake up
2 1 2 3
+5V
(Default)
+5VSB
USBPWF
3. Keyboard and USB device wake up (3-pin USBPWB)
Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped,
DRAM refreshed, system running in low power mode) using the connected USB
devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,
DRAM in slow refresh, power supply in reduced power mode).
2. Keyboard power (3-pin KBPWR)
This jumper allows you to enable or disable the keyboard wake-up feature. When you
set this jumper to pins 2–3 (+5VSB), you can wake up the computer by pressing a key
on the keyboard. This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
4. USB device wake-up (3-pin USBPWF)
Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped,
DRAM refreshed, system running in low power mode) using the connected USB
devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,
DRAM in slow refresh, power supply in reduced power mode).