6
Installation Quick Start Guide
Getting Help
Console Plus (), to facilitate the configuration of the RAID subsystem. Finally,
the guide provides details of all product features supported by the software and firmware
For further information refer to the Optional Features section of the appropriate hardware
guide since not all features are applicable to all IIR controllers.
The Hardware Guide and the Software Guide are provided on the CD-ROM in an online/
HTML format (at <cdromdrive>:\docs\index.htm) viewable with any HTML-compatible
browser, such as Microsoft Internet Explorer* or Netscape Navigator*. The Quick Start
Guide, Hardware Guide and the Software Guide can also be displayed and printed using
Adobe Acrobat Reader* (not provided on the CD-ROM).
1.2
Getting Help
Consult the accompanying Hardware Guide for your IIR controller for customer support
information.
1.3
Regulatory Information
Refer to your product’s Hardware Guide for certification and regulatory information.
1.4
Warnings and Cautions
This guide and all associated guides in the user documentation set (the Quick Start Guide,
the Hardware Guide, and the Software Guide) should be used by qualified technical
personnel with experience installing and configuring PCI adapter cards.
Read and adhere to all warnings, cautions, and notices in this guide and all the guides in
the user documentation set supplied with this product.
Warnings
•
The connection of a non-shielded equipment interface cable to this equipment will
invalidate the FCC certification of this device and may cause interference levels that
exceed the limits established by the FCC for this equipment. It is the responsibility of
the user to obtain and use a shielded equipment interface cable with this device. If the
equipment has more than one interface connector, do not leave cables connected to
unused interfaces unless otherwise instructed to do so in the user manual.
•
Changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate the equipment.
Cautions
•
Take precautions to prevent electrostatic discharge (ESD) damage before handling the
IIR controller.
•
ESD can damage adapter card components. Perform the described procedures in this
guide only at an ESD workstation. If no such station is available, you can provide some
