Asus I220GC Page 76 User Manual Download

Page: 76 / 82

2-38

Chapter 2: BIOS setup

Exit & Discard Changes

Select this option only if you do not want to save the changes that you made to

the Setup program. If you made changes to fields other than System Date, System

Time, and Password, the BIOS asks for a confirmation before exiting.

Discard Changes

This option allows you to discard the selections you made and restore the

previously saved values. After selecting this option, a confirmation appears. Select

Ok to discard any changes and load the previously saved values.

Load Setup Defaults

This option allows you to load the default values for each of the parameters on the

Setup menus. When you select this option or if you press <F5>, a confirmation

window appears. Select Ok to load default values. Select Exit & Save Changes or

make other changes before saving the values to the non-volatile RAM.

Summary of Contents for I220GC



















































































Search results

Summary of Contents for I220GC

Reviews:

Related manuals for I220GC

Brands by name

Popular brands

Asus I220GC, User Manual

Search results

Summary of Contents for I220GC

Reviews:

Related manuals for I220GC

Brands by name

Popular brands