Asus GigaX1024X, User Manual

Page: 8 / 57

ASUS GigaX1024 X 7
English
Troubleshooting
This troubleshooting guide provides answers to some common problems
which you may encounter while installing and/or using the ASUS
GigaX1024 X switch. These problems requires simple troubleshooting that
you can perform by yourself. Contact the ASUS Technical Support if you
encounter problems not mentioned in this section.
Problem Action
The POWER LED does not
light up.
Check if the power cable is properly
connected to the switch and to
an electrical outlet with a correct
voltage output.
• Check if the Ethernet cable is
properly connected to the switch
and to the network device.
• Make sure that the switch
and your network device are
powered on.
• Check if the Ethernet cable
is sufficient to your network
requirements. Make sure you
use Category 5 cables. 10Mbit/
sec cables may work with lower
quality cables.
The STATUS/SPEED LED
does not light up even
after an Ethernet cable is
connected.