Asus G70AB User Manual Download Page 33

Page: 33 / 82

English

ASUS G70AB

Chapter 3

Connecting devices to your computer

Connecting a USB storage device

This desktop PC provides USB .0/1.1 and USB 3.0 ports on both the front and rear panels.

These USB ports allow you to connect USB devices such as storage devices.

To connect a USB storage device:

•

Insert the USB storage device to your computer.

Front panel

Rear panel

DO NOT remove a USB storage device when data transfer is in progress. Doing so may

cause data loss or damage the USB storage device.

To remove a USB storage device:

From the Start Screen, click

Desktop

to launch the Desktop Mode.

Click from the taskbar, then click

Eject

[Name of USB Drive]

When the

Safe to Remove Hardware

message pops up, remove the USB storage

device from your computer.

Summary of Contents for G70AB



















































































Search results

Summary of Contents for G70AB

Reviews:

Related manuals for G70AB

Brands by name

Popular brands

Asus G70AB, User Manual

Search results

Summary of Contents for G70AB

Reviews:

Related manuals for G70AB

Brands by name

Popular brands