Asus G10AC User Manual Download Page 61

Page: 61 / 111

ASUS G10AC

During the system reboot, the Power LED flashes to indicate that the dust extraction fan

rotates in reverse to remove the dust from the internal system components.

From the

Monitor

menu, select

Clean Level

and press <Enter> to display its

configuration options.

Select your preferred option from

Clean Level

’s four configuration options:

•

Disable: Disables the fan system and the fan operates under the Q-Fan settings.

•

Silent: 40% of the fan’s performance (poor performance but low noise)

•

Optimal: 70% of the fan’s performance (standard setting).

•

Performance: Fan’s full performance (best performance but noisy)

Press <F10> and click

Yes

to save your settings. The system automatically reboots to

finish the setup process.

Summary of Contents for G10AC















































































































Search results

Summary of Contents for G10AC

Reviews:

Related manuals for G10AC

Brands by name

Popular brands

Asus G10AC, User Manual

Search results

Summary of Contents for G10AC

Reviews:

Related manuals for G10AC

Brands by name

Popular brands