Asus F1A55-M LK R2.0 User Manual Download Page 57

Page: 57 / 68

Chapter 2: BIOS information

2-19

Change Settings [IO=3F8h; IRQ=4]

Allows you to select the Serial Port base address. Configuration options: [Auto]

[IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]

2.5.6

APM

Restore AC Power Loss [Power Off]

[Power On]

The system goes into on state after an AC power loss.

[Power Off]

The system goes into off state after an AC power loss.

[Last State]

The system goes into either off or on state, whatever the system state was

before the AC power loss.

Power On By PS/2 Keyboard [Disabled]

[Disabled]

Disables the Power On by a PS/2 keyboard.

[Space Bar]

Sets the Space Bar on the PS/2 keyboard to turn on the system.

[Ctrl-Esc]

Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.

[Power Key]

Sets Power key on the PS/2 keyboard to turn on the system. This feature

requires an ATX power supply that provides at least 1A on the +5VSB lead.

Power On By PME [Disabled]

[Disabled]

Disables the PME to wake up by PCI/PCIE devices.

[Enabled]

Allows you to turn on the system through a PCI/PCIE LAN or modem card.

This feature requires an ATX power supply that provides at least 1A on the

+5VSB lead.

Power On By Ring [Disabled]

[Disabled]

Disables Ring to generate a wake event.

[Enabled]

Enables Ring to generate a wake event.

Power On By RTC [Disabled]

[Disabled]

Disables RTC to generate a wake event.

[Enabled]

When set to [Enabled], the items

RTC Alarm Date (Days)

and

Hour/

Minute/Second

will become user-configurable with set values.

2.5.7

Network Stack

Network Stack [Disable Link]

This item allows user to disable or enable the UEFI network stack. Configuration options:

[Disable Link] [Enabled]

Ipv4 PXE Support [Enabled]

This item appears only when you set the Network Stack item to [Enabled]. When this item is

disabled, the IPV4 PXE boot option will not be created. Configuration options: [Disable Link]

[Enabled]

Ipv6 PXE Support [Enabled]

This item appears only when you set the Network Stack item to [Enabled]. When this item is

disabled, the IPV6 PXE boot option will not be created. Configuration options: [Disable Link]

[Enabled]

Summary of Contents for F1A55-M LK R2.0





































































Search results

Summary of Contents for F1A55-M LK R2.0

Reviews:

Related manuals for F1A55-M LK R2.0

Brands by name

Popular brands

Asus F1A55-M LK R2.0, User Manual

Search results

Summary of Contents for F1A55-M LK R2.0

Reviews:

Related manuals for F1A55-M LK R2.0

Brands by name

Popular brands