Asus F1A55-M LK R2.0 User Manual Download Page 30

Page: 30 / 68

1.10

Connectors

1.10.1

Rear panel ports

PS/2 Mouse port (green).

This port is for a PS/2 mouse.

LAN (RJ-45) port.

This port allows Gigabit connection to a Local Area Network (LAN)

through a network hub.

LAN port LED indications

Activity/Link LED Speed LED
Status

Description

Status

Description

OFF

No link

OFF

10Mbps connection

ORANGE

Linked

ORANGE

100Mbps connection

BLINKING

Data activity

GREEN

1Gbps connection

LAN port

SPEED

LED

ACT/LINK

LED

Line In port (light blue)

. This port connects the tape, CD, DVD player, or other audio

sources.

Line Out port (lime)

. This port connects to a headphone or a speaker. In 4-channel,

6-channel, and 8-channel configurations, the function of this port becomes Front

Speaker Out.

Microphone port (pink)

. This port connects a microphone.

3 4

Refer to the audio configuration table below for the function of the audio ports in the 2, 4, 6,

or 8-channel configuration.

Audio 2, 4, 6, 8-channel configuration

Port

Headset 2-channel

4-channel

6-channel

8-channel

Light Blue (Rear panel)

Line In

Rear Speaker Out

Lime (Rear panel)

Line Out

Front Speaker Out

Pink (Rear panel)

Mic In

Bass/Center

Lime (Front panel)

Side Speaker Out

To configure an 8-channel audio output:

Use a chassis with HD audio module in the front panel to support an 8-channel audio

output.

Chapter 1: Product introduction

1-20

Summary of Contents for F1A55-M LK R2.0





































































Search results

Summary of Contents for F1A55-M LK R2.0

Reviews:

Related manuals for F1A55-M LK R2.0

Brands by name

Popular brands

Asus F1A55-M LK R2.0, User Manual

Search results

Summary of Contents for F1A55-M LK R2.0

Reviews:

Related manuals for F1A55-M LK R2.0

Brands by name

Popular brands