Asus ESC8000 4G Series User Manual Download Page 160

Page: 160 / 186

7-2

Chapter 7: Driver Installation

7.1

RAID driver installation

After creating the RAID sets for your server system, you are now ready to install an

operating system to the independent hard disk drive or bootable array. This part provides the

instructions on how to install the RAID controller drivers during OS installation.

7.1.1

Creating a USB flash drive with RAID drive

When installing Window

s®

Server OS, you can load the RAID driver from a USB flash drive.

You can create a USB flash drive with RAID driver in Windows by copying the files from the

support DVD to the USB flash drive.
To copy the RAID driver to a USB flash drive in Windows environment:

Place the motherboard support DVD in the optical drive.

Connect a USB flash drive to your system.

3. Click on the optical drive to browse the contents of the support DVD.

4. Click

Drivers

C620 INTEL RAID

Windows

Driver

and then copy the RAID driver

folder to the USB flash drive.

7.1.2

Installing the RAID controller driver

During Windows

Server 2012 R2 OS installation

To install the RAID controller driver when installing Windows

Server 2012 R2 OS:

Boot the computer using the Windows

Server 2012 R2 OS installation disc. Follow the

screen instructions to start installing Windows Server 2012 R2.

When prompted to choose a type of installation, click

Custom: Install Windows only

(advanced)

Summary of Contents for ESC8000 4G Series



























































































































































































Search results

Summary of Contents for ESC8000 4G Series

Reviews:

Asus ESC8000 4G Series, User Manual, Page: 160 / 186

Search results

Summary of Contents for ESC8000 4G Series

Reviews: