Asus ESC700 G2 User Manual Download

Page: 160 / 166

6-24

Chapter 6: Driver installation

6.4

System Recovery

The system

Recovery Partition

(F9 Recovery) and the

Recovery DVD

assist you in

reinstalling the OS and restoring it to its original working state. Before using the Recovery

Partition or the Recovery DVD, copy your data files (such as Outlook PST files) to USB flash

drives or to a network drive and make note of any customized configuration settings (such as

network settings).

We recommend that you recover the system using the Recovery Partition for

faster system recovery. If the Recovery Partition on the hard drive is failed or

deleted, use the Recovery DVD for system recovery.

6.4.1

Using the Recovery Partition

Turn on your system and press <F9> when the ASUS logo appears.

The

Windows Boot Manager

window appears. Select

Windows Setup [EMS

Enabled]

and press <Enter>. Wait when the

Windows is loading files message

appears.

After the system reboots, an

ASUS Preload window

appears. Press

Next

to continue.

Select

Recover Windows to first partition only

. This option deletes only the first

partition, allows you to keep other partitions, and creates a new system partition as

drive “C”.

When a window appears querying

Are you sure you want to recover now

, click

Finish

. The process percentage is displayed on the screen.

When a

Recovery finish

message appears, click

and the system restarts. After it

restarts, follow the onscreen instructions to complete the system configurations.

6.4.2

Using the Recovery DVD

Turn on your system and press <F8> when the ASUS logo appears.

Insert the Recovery DVD into the optical drive when a

Please select boot device

menu appears. Select the optical drive as the boot device then press <Enter>. The

system restarts.

After the system reboots, an

ASUS Preload

window appears. Press

Next

to continue.

Select where to install a new system. Options are:

Recover system to a partition:

This option deletes only the partition you select from below, allows you to

keep other partitions, and creates a new system partition as drive “C”.

Recover system to entire HD:

This option deletes all partitions from your hard disk and creates a new

system partition as drive “C”.

Follow the onscreen instructions to complete the recovery process. You will lose all

your data during the system recovery. Ensure that you make a backup of it before

recovery the system.

Insert the Support DVD into the optical drive when prompted. Click

and the system

reboots.

Summary of Contents for ESC700 G2







































































































































































Search results

Summary of Contents for ESC700 G2

Reviews:

Related manuals for ESC700 G2

Brands by name

Popular brands

Asus ESC700 G2, User Manual

Search results

Summary of Contents for ESC700 G2

Reviews:

Related manuals for ESC700 G2

Brands by name

Popular brands