Asus ESC500 G3 User Manual Download Page 104

Page: 104 / 182

4-26

Chapter 4: BIOS setup

4.6.1

CPU Configuration

The items in this menu show the CPU-related information that the BIOS automatically

detects.

The items in this menu may vary based on the CPU installed.

Intel Adaptive Thermal Monitor [Enabled]

[Enabled]

Enables the overheated CPU to throttle its clock speed to cool down.

[Disabled]

Disables the CPU thermal monitor function.

Hyper-threading [Enabled]

The Intel Hyper-Threading Technology allows a hyper-threading processor to appear as two

logical processors to the operating system, allowing the operating system to schedule two

threads or processes simultaneously.

[Enabled]

Two threads per activated core are enabled.

[Disabled]

Only one thread per activated core is enabled.

This Item apears only if you installed a CPU that supports the Intel Hyper-threading

technology.

Summary of Contents for ESC500 G3























































































































































































Search results

Summary of Contents for ESC500 G3

Reviews:

Related manuals for ESC500 G3

Brands by name

Popular brands

Asus ESC500 G3, User Manual

Search results

Summary of Contents for ESC500 G3

Reviews:

Related manuals for ESC500 G3

Brands by name

Popular brands