5-35
ASUS ESC4000A-E10
System probe filter [Auto]
This item allows you to enable or disable the probe filter. This has no effect on parts where
the probe filter is fuse disabled.
Configuration options: [Disabled] [Enabled] [Auto]
Memory Clear [Auto]
When this item is set to [Disabled], BIOS does not implement MemClear after memory
training (only if non-ECC DIMMs are used).
Configuration options: [Disabled] [Enabled] [Auto]
PSP error injection support [False]
Configuration options: [False] [True]
5.11.3 UMC Common Option
DDR4 Common Options
DRAM Timing Configuration
This item allows you to enable DRAM timing configuration.
Damage caused by use of your AMD processor outside of specification or in excess of
factory settings are not covered by your system manufacturers warranty.
DRAM Controller Configuration
DRAM Power Options
Power Down Enable [Auto]
This item allows you to enable or disable power down mode.
Configuration options: [Disabled] [Enabled] [Auto]
Cmd2T [Auto]
Configuration options: [Auto] [1T] [2T]
Gear Down Mode [Auto]
Configuration options: [Auto] [Disabled] [Enabled]
CAD Bus Configuration
CAD Bus Timing User Controls [Auto]
This item allows you to set the CAD bus signals to Auto or Manual.
Configuration options: [Auto] [Manual]
The following items appear only when
CAD Bus Timing User Controls
is set to
[Manual]
.
AddrCmdSetup [0]
This item allows you to setup time on CAD bus signals.
Configuration options: [0] - [39]
