Asus ESC4000A-E10 User Manual Download Page 101

Page: 101 / 142

5-19

ASUS ESC4000A-E10

BME DMA Mitigation [Disabled]

This allows you to enable or disable re-enabling Bus Master Attribute disabled during Pci

enumeration for PCI Bridges after SMM locked.

Configuration options: [Disabled] [Enabled]

OnBrd/Ext VGA Select [Auto]

This allows you to select between onboard or external VGA support.

Configuration options: [Auto] [Onboard] [External]
PCIE OPROM Slot Options
The items in this option allows you to select the OPROM configurations for slots.

PCIE OPROM Slot Options

The items in this option allows you to select the OPROM configurations for slots.

5.5.8

USB Configuration

Legacy USB Support [Enabled]

Allows you to enable or disable Legacy USB device support.

Configuration options: [Enabled] [Disabled] [Auto]

XHCI Hand-off [Enabled]

Allows you to enable or disable workaround for OSes without XHCI hand-off support. The

XHCI ownership change should be claimed by XHCI driver.

Configuration options: [Enabled] [Disabled]

USB Mass Storage Driver Support [Enabled]

Allows you to enable or disable the USB Mass Storage driver support.

Configuration options: [Disabled] [Enabled]

Summary of Contents for ESC4000A-E10















































































































































Search results

Summary of Contents for ESC4000A-E10

Reviews:

Brands by name

Popular brands

Asus ESC4000A-E10, User Manual

Search results

Summary of Contents for ESC4000A-E10

Reviews:

Brands by name

Popular brands