Asus ESC4000 G2 GPU User Manual Download Page 95

Page: 95 / 162

ASUS ESC4000 Series

5-25

CPU1/2 Temperature [xxxºC/xxxºF]

The onboard hardware monitor automatically detects and displays the motherboard

component and CPU temperatures. Select [Ignored] if you do not wish to display

the detected temperatures.

Front Fan1–7 Speed [xxxxRPM] or [Ignored] / [N/A]

The onboard hardware monitor automatically detects and displays the speed of

CPU fans, front fans, and rear fans in rotations per minute (RPM). If the fan is not

connected to the motherboard, the field shows [N/A].

Fan Speed Control [High Density Mode]

Allows you to configure the ASUS Smart Fan feature that smartly adjusts the fan

speeds for more efficient system operation.

Configuration options: [Full Speed Mode] [Whisper Mode] [Generic Mode]

[High Density Mode]

VCORE1/2 Voltage, +1.5V_P1/2DDR3 Voltage, +1.5V_ICH Voltage,

+1.8V_IOH Voltage, P1/2VTT Voltage, +1.1V_IOH Voltage, +12V

Voltage, +5V Voltage, +3.3V Voltage, +5VSB Voltage, +3.3VSB Voltage,

VBAT Voltage

The onboard hardware monitor automatically detects the voltage output through the

onboard voltage regulators. Select [Ignored] if you do not want to detect this item.

5.4.9

I/O Virtualization

SR-IOV Supported [Disabled]

Enables or disables the SR-IOV support. Configuration options: [Disabled] [Enabled]

BIOS SETUP UTILITY

Main Advanced

Configure I/O Virtualization Parameters

SR-IOV Supported

[Disabled]

Options

Disabled

Enabled

Summary of Contents for ESC4000 G2 GPU



































































































































































Search results

Summary of Contents for ESC4000 G2 GPU

Reviews:

Related manuals for ESC4000 G2 GPU

Brands by name

Popular brands

Asus ESC4000 G2 GPU, User Manual

Search results

Summary of Contents for ESC4000 G2 GPU

Reviews:

Related manuals for ESC4000 G2 GPU

Brands by name

Popular brands