ASUS EBE-4U
3-9
Detect Timeout
This item allows you to set the detection time (milliseconds) for enabled ports before it
exit the detection status.
Detect Non-Compliance Device
This item allows you to enable or disable detection of non-compliance PCI Express
devices. If enabled, more time will be required during POST. Configuration options:
[Disabled] [Enabled]
3.3.6
AMT Configuration
This item allows you to configure Intel
®
Active Management Technology parameters.
AMT BIOS Features
Allows you to enable or disable AMT BIOS Features. When set to [Disabled], MEBx Setup will
be inaccessible.
Configuration options: [Disabled] [Enabled]
This item does not disable Manageability Features in FW.
USB Provisioning of AMT
Allows you to enable or disable AMT USB Provisioning. Configuration options: [Disabled]
[Enabled]
End Of Post Message
Allows you to enable or disable End of Post message sent to ME. Configuration options:
[Disabled] [Enabled]
Secure Erase Configuration
Secure Erase mode
Allows you to change Secure Erase module behavior. Configuration options:
[Simulated] [Real]
[Simulated]
Performs SE flow without erasing SSD.
[Real]
Erases SSD.
Force Secure Erase
Allows you to force Secure Erase on next boot. Configuration options: [Disabled]
[Enabled]
OEM Flags Settings
Allows you to configure OEM Flags.
MEBx Selection Screen
Allows you to enable MEBx selection screen by pressing 1 to enter ME Configure
Screen or pressing 2 to initiate a remote connection. Configuration options: [Disabled]
[Enabled]
Network Access must be activated from MEBx Setup for this screen to be dispalyed.
Unconfigure ME
Allows you to unconfigure ME by resetting the MEBx password to default.
Configuration options: [Disabled] [Enabled]
