ASUS EBE-4U
2-21
13. Chassis Intrusion header (4-1 pin CHASSIS)
This header is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
By default, the pin labeled “Chassis Signal” and “Ground” are shorted with
jumper caps. Remove the jumper caps only when you intend to use the
chassis intrusion detection feature.
PIN 1
+5VSB_MB
Chassis Signal GND
CHASSIS
Connector type
HEADER 4p, K2, 2.54mm pitch
14. Speaker header (4-pin SPEAKER)
The 4-pin header is for the chassis-mounted system warning speaker. The
speaker allows you to hear system beeps and warnings.
+5V GND GND SPKO
SPEAKER
PIN 1
Connector type
HEADER 1x4p, 2.54mm pitch, S/T
