Asus EB1035 User Manual Download

Page: 11 / 61

EB1035 PC

English

BIOS Reset key

Before booting up the system, insert a straightened paper

clip into this hole to enter the BIOS.

USB 3.0 ports

These USB (Universal Serial Bus) ports provide a transfer

rate of up to 5Gbit/s and are backward compatible with

USB2.0.

USB 2.0 ports

The USB (Universal Serial Bus) 2.0 ports are compatible

with USB 2.0/1.1 devices such as keyboards, mouse

devices, cameras, and hard disk drives. USB allows many

devices to run simultaneously on a single computer, with

some peripheral acting as additional plug-in sites or hubs.

Microphone jack

The microphone jack is designed to connect the

microphone used for video conferencing, voice narrations,

or simple audio recordings.

Headphone/Audio (S/PDIF) Out jack

The stereo headphone jack (3.5mm) is used to connect

the system’s audio out signal to amplified speakers or

headphones.

NOTE:

For S/PDIF Out function, use the optional mini jack to

S/PDIF adapter to connect to your amplifier.

Summary of Contents for EB1035






























































Search results

Summary of Contents for EB1035

Reviews:

Related manuals for EB1035

Brands by name

Popular brands

Asus EB1035, User Manual

Search results

Summary of Contents for EB1035

Reviews:

Related manuals for EB1035

Brands by name

Popular brands