Asus DSL-AC52U User Manual Download

Page: 48 / 129

4.1.2 WPS

WPS (Wi-Fi Protected Setup) is a wireless security standard that

allows you to easily connect devices to a wireless network. You

can configure the WPS function via the PIN code or WPS button.

NOTE

: Ensure that the devices support WPS.

To enable WPS on your wireless network:

1. From the navigation panel, go to

Advanced Settings

Wireless

WPS

tab.

2. In the

Enable WPS

field, move the slider to

3. WPS uses 2.4GHz by default. If you want to change the

frequency to 5GHz, turn

OFF

the WPS function, click

Switch

Frequency

in the

Current Frequency

field, and turn WPS

again.

Note:

WPS supports authentication using Open System, WPA-Personal,

and WPA2-Personal. WPS does not support a wireless network that uses

a Shared Key, WPA-Enterprise, and WPA2-Enterprise encryption method.

Summary of Contents for DSL-AC52U


































































































































Search results

Summary of Contents for DSL-AC52U

Reviews:

Related manuals for DSL-AC52U

Brands by name

Popular brands

Asus DSL-AC52U, User Manual

Search results

Summary of Contents for DSL-AC52U

Reviews:

Related manuals for DSL-AC52U

Brands by name

Popular brands