background image

viii

About this guide

This user guide contains the information you need when installing the
ASUS P4B-M motherboard.

How this guide is organized

This manual contains the following parts:

Chapter 1: Product introduction

This chapter describes the features of the P4B-M motherboard. It
includes brief descriptions of the special attributes of the motherboard
and the new technology it supports.

Chapter 2: Hardware information

This chapter lists the hardware setup procedures that you have to
perform when installing system components. It includes description of
the switches, jumpers, and connectors on the motherboard.

Chapter 3: Powering up

This chapter describes the power up sequence and gives information
on the BIOS beep codes.

Chapter 4: BIOS setup

This chapter tells how to change system settings through the BIOS
Setup menus. Detailed descriptions of the BIOS parameters are also
provided.

Chapter 5: Software support

This chapter describes the contents of the support CD that comes with
the motherboard package.

Glossary

This part lists the technical terms that you may encounter when
reading this document.

Index

This part contains an alphabetical list of the topics found in this
document.

Summary of Contents for D700-NIB





















































































































Reviews: