Asus D700-NIB User Manual Download

Page: 23 / 116

ASUS P4B-M motherboard user guide

2-3

2.3

Before you proceed

Take note of the following precautions before you install motherboard
components or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any

component.

2. Use a grounded wrist strap or touch a safely grounded object or to

a metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity.

3. Hold components by the edges and do not to touch the ICs on them.

4. Whenever you uninstall any component, place it on a grounded

antistatic pad or in the bag that came with the component.

5. Before you install or remove any component, ensure that the

ATX power supply is switched off or the power cord is
detached from the power supply. Failure to do so may cause
severe damage to the motherboard, peripherals, and/or
components.

When lit, the onboard LED indicates that the system is in suspend or
soft-off mode, not powered OFF. See the illustration below.

Figure 2-3

Onboard Power LED

P4B-M

P4B-M Onboard LED

OFF

Standby

Power

Powered

Off

Summary of Contents for D700-NIB





















































































































Search results

Summary of Contents for D700-NIB

Reviews:

Related manuals for D700-NIB

Brands by name

Popular brands

Asus D700-NIB, User Manual

Search results

Summary of Contents for D700-NIB

Reviews:

Related manuals for D700-NIB

Brands by name

Popular brands