Asus CUPLE-VM User Manual Download Page 9 | Manualshive

Page: 9 / 92

background image

ASUS CUPLE-VM User’s Manual

9

2. FEATURES

2. FEA

TURES

Specifications

•

USB: Supports up to 4 USB ports, two on the back panel and two midboard, for
more peripheral connectivity options.

•

PC Health Monitoring: Provides an easy way to examine and manage system
status information, such as CPU and systerm voltages, temperatures, and fan
status through the onboard hardware ASUS ASIC and the bundled ASUS PC
Probe.

•

SMBus: Features the System Management Bus interface, which is used to
physically transport commands and information between SMBus devices.

•

PCI Expansion Slots: Provides four 32-bit PCI (Rev. 2.1) expansion slots, which
can support Bus Master PCI cards, such as SCSI or LAN cards (PCI supports up
to 133MB/s maximum throughput).

•

AMR Slot: Provides one AMR expansion slot, which can support Audio
Modem Riser cards.

•

Super Multi-I/O: Provides two high-speed UART compatible serial ports and
one parallel port with EPP and ECP capabilities.

•

Enhanced ACPI & Anti-Boot Virus Protection: Programmable BIOS (Flash
EEPROM), offering enhanced ACPI for Windows 98 compatibility, built-in
firmware-based virus protection, and autodetection of most devices for virtually
automatic setup.

•

Concurrent PCI: Concurrent PCI allows multiple PCI transfers from PCI
master busses to the memory and processor.

•

Smart BIOS: 2Mb firmware provides Vcore and CPU/SDRAM frequency
adjustments, boot block write protection, and HD/SCSI/MO/ZIP/CD/Floppy boot
selection. Power supply autodetects to enable/disable suspend-to-RAM.

•

Integrated Infrared (IrDA) Support: Integrated IR supports an optional
remote control package for wireless interfacing with external peripherals,
personal gadgets, or an optional remote controller.

•

Desktop Management Interface (DMI): Supports DMI through BIOS, which
allows hardware to communicate within a standard protocol creating a higher
level of compatibility. (Requires DMI-enabled components.)

•

Color-coded Connectors: To enhance user accessibility to system components and
to meet PC 99 compliancy, major connectors in this motherboard are color-coded.

«
...
7
8
9
10
11
...
»

Summary of Contents for CUPLE-VM





























































































Reviews:

No comments

Related manuals for CUPLE-VM

Brand: Udoo Pages: 9

Brand: u-blox Pages: 25

MachXO5-NX Development Kit

Brand: Lattice Semiconductor Pages: 64

Brand: NXP Semiconductors Pages: 12

Brand: RAK Pages: 17

EmbCore ROM-7421

Brand: Advantech Pages: 25

Brand: DFI Pages: 60

Brand: ST Pages: 82

Brand: JETWAY Pages: 44

GA-H170M-HD3 DDR3

Brand: Gigabyte Pages: 44

Brand: EPC Pages: 10

Brand: EPOX Pages: 64

Brand: Shuttle Pages: 50

Brand: JETWAY Pages: 55

Brand: Advantech Pages: 84

Brand: ASROCK Pages: 139

Brand: DFI Pages: 92

Brand: Gigabyte Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands