Asus CUPLE-VM User Manual Download Page 8 | Manualshive

Page: 8 / 92

background image

8

ASUS CUPLE-VM User’s Manual

2.1 The ASUS CUPLE-VM

The ASUS CUPLE-VM motherboard is carefully designed for the demanding PC
user who wants advanced features processed by the fastest processors.

2.1.1 Specifications

•

Intel

®

Celeron™/Coppermine™, Pentium III

®

and VIA

®

Cyrix™ Proces-

sor Support: Supports Socket 370 based Intel

®

Celeron™/Coppermine™, Pen-

tium III

®

and VIA

®

Cyrix™ processors.

•

North Bridge System Chipset: Features the VIA

®

VT8601A (PLE133) system

controller with support for 133 MHz Front Side Bus (FSB); up to 1 GB of PC133/
PC100 SDRAM; complies with 4X, 2X, and 1X AGP modes; and PCI 2.2. bus
interface with support for 4 PCI masters. It is optimized to deliver enhanced
Intel

®

Celeron™/Coppermine™ and VIA

®

Cyrix™ processor system

performance.

•

“Super South” South Bridge System PCI set: Features the VIA

®

VT82C686B

PCI chipset with a PCI Super-I/O Integrated Peripheral Controller (PSIPC) sup-
porting UltraDMA/100, which allows burst mode data transfer rates of up to
100MB/sec; AC97 audio; USB controller with root hub and four function ports.

•

PC133 SDRAM / VC133 VCM Support: Equipped with two Dual Inline
Memory Module (DIMM) sockets to support Intel

®

PC133-compliant (8, 16,

32, 64, 128, 256, or 512MB) or NEC’s VC133-compliant Virtual Channel (VC)
SDRAM up to 1GB. VC SDRAM is a new DRAM core architecture that dra-
matically improves the memory system’s ability to service, among others, high
multimedia requirements.

•

Optional PCI Controller: Creative CT5880 Audio Controller Chipset with AC97
Audio CODEC complete with software support.

•

JumperFree™ Mode: Allows processor settings and easy overclocking of
frequency and Vcore voltage all through BIOS setup when JumperFree™ mode
is enabled. Easy-to-use DIP switches instead of jumpers are included to allow
manual adjustment of the processor’s external frequency.

•

UltraDMA/100 Support: Comes with an onboard PCI Bus Master IDE
controller with two connectors that support four ATA100/66/33 devices on two
channels. Supports UltraDMA/100, UltraDMA/66, UltraDMA/33, PIO Modes
3 & 4 and Bus Master IDE DMA Mode 2, and Enhanced IDE devices, such as
DVD-ROM, CD-ROM, CD-R/RW, LS-120, and Tape Backup drives.

•

Wake-On-LAN Connector: Supports Wake-On-LAN activity through an
optional onboard Realtek Fast Ethernet Controller or an optional ASUS PCI-
L101 10/100 Fast Ethernet PCI card (see 7. Appendix).

•

Wake-On-Ring Connector: Supports Wake-On-Ring activity through a PCI
modem card that supports a WOR connector.

2. FEATURES

Specifications

2. FEA

TURES

«
...
6
7
8
9
10
...
»

Summary of Contents for CUPLE-VM





























































































Reviews:

No comments

Related manuals for CUPLE-VM

Brand: Aaeon Pages: 100

Brand: Aaeon Pages: 120

Brand: Aaeon Pages: 116

Brand: Aaeon Pages: 119

Brand: Aaeon Pages: 111

Brand: Aaeon Pages: 106

Brand: Aaeon Pages: 48

Brand: Aaeon Pages: 44

Brand: IEI Technology Pages: 211

Brand: IEI Technology Pages: 8

Brand: IEI Technology Pages: 8

Brand: Texas Instruments Pages: 52

Brand: ASROCK Pages: 126

A20-OLINUXINO-LIME

Brand: OLIMEX Pages: 49

975X Platinum Series

Brand: MSI Pages: 157

Brand: Analog Devices Pages: 7

Brand: Texas Instruments Pages: 44

Brand: Advantech Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands