Asus CUBX-E User Manual Download | Manualshive

Page: 72 / 101

background image

ASUS CUBX-L\CUBX-E User’s Manual

72

4. BIOS SETUP

4. BIOS SETUP

Other Boot Device Select [INT18 Device (Network)]

Configuration options: [Disabled] [SCSI Boot Device/Onboard ATA Boot De-
vice] [INT18 Device (Network)] [LANDesk (R) Service Agent]

IMPORTANT:

The option [SCSI Boot Device/Onboard ATA Boot De-

vice] is available only on the CUBX-E model. If [SCSI/Onboard ATA
Boot Device] is selected, the system will boot from the UltraDMA/100/
66 device first if Onboard ATA Device First is set to [Yes] (see 4.4.3
PCI Configuration). Otherwise, it will boot from the SCSI device.

Plug & Play O/S [No]

This field allows you to use a Plug-and-Play (PnP) operating system to con-
figure the PCI bus slots instead of using the BIOS. When [Yes] is selected,
interrupts may be reassigned by the OS. When a non-PnP OS is installed or
you want to prevent reassigning of interrupt settings, select the default set-
ting of [No]. Configuration options: [No] [Yes]

Reset Configuration Data [No]

The Extended System Configuration Data (ESCD) contain information about
non-PnP devices. It can also hold the complete record of how the system
was configured the last time it was booted. Select [Yes] only if you want to
clear these data during the Power-On Self Test (POST). Configuration op-
tions: [No] [Yes]

Boot Virus Detection [Enabled]

This field allows you to set boot virus detection, ensuring a virus-free boot
sector. The system halts and displays a warning message when it detects a
virus. If this occurs, you can either allow the operation to continue or use a
virus-free bootable floppy disk to restart and investigate your system. Con-
figuration options: [Disabled] [Enabled]

Quick Power On Self Test [Enabled]

This feature enables you to speed up the bootup by skipping some POST
routines such as memory checking. Configuration options: [Disabled] [En-
abled]

Boot Up Floppy Seek [Enabled]

When enabled, the BIOS will seek the floppy disk drive to determine whether
the drive has 40 or 80 tracks. Floppy drives with 1.44MB have 80 tracks.
You may leave the default [Disabled] to save time if you are using 1.44MB
floppy drives. Configuration options: [Disabled] [Enabled]

Full Screen Logo [Enabled]

Configuration options: [Disabled] [Enabled]

Boot Menu

«
...
70
71
72
73
74
...
»

Summary of Contents for CUBX-E






































































































Reviews:

No comments

Related manuals for CUBX-E

Brand: Danbit Pages: 70

Brand: Yamaha Pages: 82

Brand: IEI Technology Pages: 234

Brand: Acconeer Pages: 14

ISL70219ASEHEV1Z

Brand: Intersil Pages: 10

Brand: Quantum Design Pages: 77

Brand: DFI Pages: 60

Brand: ASROCK Pages: 26

HBJC390F841VAG34B

Brand: JETWAY Pages: 44

Brand: Atmel Pages: 39

Brand: Gigabyte Pages: 37

Brand: SOLTEK Pages: 94

Brand: Gigabyte Pages: 116

Brand: Texas Instruments Pages: 18

Brand: ASROCK Pages: 47

Brand: Intel Pages: 62

Brand: DFI Pages: 107

Brand: Intel Pages: 92

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands