Asus CUBX-E User Manual Download | Manualshive

Page: 53 / 101

background image

ASUS CUBX-L\CUBX-E User’s Manual

53

4. BIOS SETUP

4. BIOS SETUP

Main Menu

Language [English]

This allows selection of the BIOS’ displayed language. Configuration options:
[English]

Supervisor Password [Disabled], User Password [Disabled]

This field allows you to set the password. To set the password, highlight the appro-
priate field and press <Enter>.
Type in a password and press <Enter>. You can type up to eight alphanumeric char-
acters. Symbols and other keys are ignored. To confirm the password, type the pass-
word again and press the <Enter>. The password is now set to [Enabled]. This pass-
word allows full access to the BIOS Setup menus.
To clear the password, highlight this field and press <Enter>. The same dialog box
as above will appear. Press <Enter> and the password will be set to [Disabled].

A Note about Passwords

The BIOS Setup program allows you to specify passwords in the Main menu. The
passwords control access to the BIOS and certain security menu options during sys-
tem startup. The passwords are not case sensitive. In other words, it makes no differ-
ence whether you enter a password using upper or lowercase letters.
The BIOS Setup program allows you to specify two separate passwords: a Supervisor
password and a User password. When disabled, anyone may access all BIOS Setup
program functions. When enabled, the Supervisor password is required for entering
the BIOS Setup program and having full access to all menu options.
Forgot the password?
If you forgot the password, you can clear the password by erasing the CMOS
Real Time Clock (RTC) RAM. The RAM data containing the password
information is powered by the onboard button cell battery. To erase the
RTC RAM: (1) Unplug your computer, (2) Short the solder points, (3) Turn
ON your computer, (4) Hold down <Delete> during bootup and enter BIOS
setup to re-enter user preferences.

CUBX-L/CUBX-E Clear RTC RAM

Short solder points
to Clear CMOS

CLRTC

Intel

PIIX4E

PCIset

C297

®

Halt On [All Errors]

This field determines which types of errors will cause the system to halt.
Configuration options: [All Errors] [No Error] [All but Keyboard] [All but
Disk] [All but Disk/Keyboard]

Installed Memory [XXX MB]

This field displays the amount of conventional memory detected by the
system during bootup. You do not need to make changes to this field. This
is a display only field.

«
...
51
52
53
54
55
...
»

Summary of Contents for CUBX-E






































































































Reviews:

No comments

Related manuals for CUBX-E

Brand: Rabbit Pages: 144

Brand: Gan Systems Pages: 24

TA870 PLUS - SETUP 2

Brand: Biostar Pages: 67

Brand: Advantech Pages: 98

Brand: Obdstar Pages: 46

Brand: DFI Pages: 60

AP0101AT2L00XPGAH3-GEVB

Brand: ON Semiconductor Pages: 6

DLP LightCrafter Display 3310

Brand: Texas Instruments Pages: 16

Brand: Gigabyte Pages: 36

z170a GAMING M9 ACK

Brand: MSI Pages: 109

Brand: Supero Pages: 80

Brand: Aura Light Pages: 8

Brand: Texas Instruments Pages: 20

Brand: ON Semiconductor Pages: 5

Brand: OLIMEX Pages: 14

TLE986 Evalboard Series

Brand: Infineon Pages: 20

Brand: MSI Pages: 32

Brand: Carp Design Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands