Asus CROSSHAIR III FORMULA User Manual Download Page 54

Page: 54 / 170

2.7

I/O shield, LCD Poster

and Audio card Installation

1. Install the I/O shield to the chassis

by snapping it in place from inside.

2.7.1

I/O shield and LCD Poster Installation

2. Orient the motherboard and install

it to the chassis. Make sure that the

motherboard external ports fit the

I/O openings.

Be cautious when installing the motherboard. The I/O shield edge springs may

damage the I/O ports.

3. Thread the LCD Poster cable

through the back I/O shield opening

until the stopper fits the opening.

5. Place the LCD Poster on the

chassis or to wherever you like.

4. Locate and connect the LCD

Poster cable to the

LCD_CON

connector.

The the photos above are for reference only, the actual I/O shield may differ by

models.

2-26

Chapter 2: Hardware information

Summary of Contents for CROSSHAIR III FORMULA











































































































































































Search results

Summary of Contents for CROSSHAIR III FORMULA

Reviews:

Related manuals for CROSSHAIR III FORMULA

Brands by name

Popular brands

Asus CROSSHAIR III FORMULA, User Manual

Search results

Summary of Contents for CROSSHAIR III FORMULA

Reviews:

Related manuals for CROSSHAIR III FORMULA

Brands by name

Popular brands