ASUS Cerberus
3
Connecting to smart devices
• Connect your headset’s analog connector into your smart device such as
mobile phone or tablet PC.
• Use the in-line controllers to increase/decrease the volume or mute the
microphone.
Connecting to PC or MAC
1. Connect your headset’s analog connector into the bundled Y-cable.
2. Connect the Y-cable’s headphone connector to your computer’s
headphone port.
Connect the Y-cable’s microphone connector to your computer’s
microphone port.
3. You can connect the bundled microphone boom to your headset.
NOTE
: The in-line microphone is disabled when the microphone
boom is connected.
4. Use the in-line controllers to increase/decrease the volume or mute the
microphone.
Using your headset
NOTE
: There are L and R markings on the ear cups.
Specification summary
•
Frequency response
: 20Hz~20kHz
•
Speaker driver
: 60mm neodymium magnet speaker drivers
•
Impedance
: 32 ohms
•
Ear cups
: 100mm large ear cups with ultra breathable material
•
Connectors:
3.5mm 4-pole analog connector (smart devices)
•
Extension:
3.5mm 3-pole analog headphone & microphone Y-cable
connector
•
Microphone boom
:
-40dB sensitivity unidirectional microphone boom
•
In-line microphone
:
-45dB sensitivity omnidirectional microphone
English