background image

 

4

Safety statements 

 

Regulatory Information/Disclaimers 

Installation and use of this Bluetooth device must be in strict accordance with the 
instructions included in the user documentation provided with the product. Any 
changes or modifications (including the antennas) made to this device that are not 
expressly approved by the manufacturer may void the user’s authority to operate 
the equipment. The manufacturer is not responsible for any radio or television 
interference caused by unauthorized modification of this device, or the substitution 
of the connecting cables and equipment other than manufacturer specified. It is the 
responsibility of the user to correct any interference caused by such unauthorized 
modification, substitution or attachment. Manufacturer and its authorized resellers 
or distributors will assume no liability for any damage or violation of government 
regulations arising from failing to comply with these guidelines. 

 
CAUTION! 

To maintain compliance with FCC’s RF exposure guidelines, this 

equipment should be installed and operated with minimum distance [20cm] 
between the radiator and your body. Use on the supplied antenna. Unauthorized 
antenna, modification, or attachments could damage the transmitter and may 
violate FCC regulations. 

Safety Information 

In order to maintain compliance with the FCC RF exposure guidelines, this 
equipment should be installed and operated with minimum distance 

[20cm] 

between the radiator and your body. Use only with supplied antenna. 
Unauthorized antenna, modification, or attachments could damage the transmitter 
and may violate FCC regulations. 

 
CAUTION! 

Any changes or modifications not expressly approved in this manual 

could void your authorization to use this device. 

MPE Statement 

Your device contains a low power transmitter. When device is transmitted it sends 
out Radio Frequency (RF) signal. 

 

FCC Radio Frequency Exposure 

This Bluetooth device has been evaluated under FCC Bulletin OET 65C and found 
compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 
15.247(b)(4) addressing RF Exposure from radio frequency devices. The radiation 
output power of this Bluetooth device is far below the FCC radio frequency exposure 
limits. Nevertheless, this device shall be used in such a manner that the potential for 
human contact during normal operation – as a mobile or portable device but use in 

Summary of Contents for BT-180









Reviews: