ASUS BP5265/AS-D770
3-3
To update the BIOS using EZ Flash 2:
1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for
the motherboard.
2. Save the BIOS file to a floppy disk or a USB flash disk, then restart the system.
3. You can launch the EZ Flash 2 by two methods.
3.1.2
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go
through the long process of booting from a floppy disk and using a DOS-based
utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing
<Alt> + <F2> during the Power-On Self-Test (POST).
(2) Enter BIOS setup program. Go to the
Tools
menu to select
EZ Flash2
and press <Enter> to enable it.
(1)
Insert the floppy disk / USB flash disk that contains the BIOS file to the
floppy disk drive or the USB port.
Press <Alt> + <F2> during POST to display the following.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.26
Current ROM
Update ROM
A:
Note
[Enter] Select or Load
[Tab] Switch
[ V ] D r i v e I n f o
[Up/Down/Home/End] Move [B] Backup
[ESC] Exit
FLASH TYPE:
MXIC 25L1605A
PATH:
A:\
BOARD:
P5Q-EM-DO BP5265
VER:
0106
(H:00 B:00)
DATE:
04/08/2009
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
You can switch between drives by pressing <Tab> before the correct file
is found. Then press <Enter>.
• This function can support devices such as USB flash disk, or floppy disk
with
FAT 32/16
format only.
• Do not shut down or reset the system while updating the BIOS to prevent
system boot failure!
4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update
process and automatically reboots the system when done.
