Asus AS-D592 Page 69 User Manual Download

Page: 69 / 74

ASUS BP5220/AS-D592

3-33

3.6.2

Boot Settings Configuration

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Boot Settings Configuration

Quick Boot

[Enabled]

Full Screen Logo

[Enabled]

AddOn ROM Display Mode

[Force BIOS]

Bootup Num-Lock

[On]

PS/2 Mouse Support

[Auto]

Wait For ‘F1’ If Error

[Enabled]

Hit ‘DEL’ Message Display

[Enabled]

Interrupt 19 Capture

[Disabled]

Allows BIOS to skip

certain tests while

booting. This will

decrease the time

needed to boot the

system.

Set this item to [Enabled] to use the ASUS MyLogo2™ feature.

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST) while

booting to decrease the time needed to boot the system. When set to [Disabled],

BIOS performs all the POST items. Configuration options: [Disabled] [Enabled]

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature.

Configuration options: [Disabled] [Enabled]

Add On ROM Display Mode [Force BIOS]

Sets the display mode for option ROM. Configuration options: [Force BIOS]

[Keep Current]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock.

Configuration options: [Off] [On]

PS/2 Mouse Support [Auto]

Allows you to enable or disable support for PS/2 mouse.

Configuration options: [Disabled] [Enabled] [Auto]

Wait for ‘F1’ If Error [Enabled]

When set to Enabled, the system waits for the F1 key to be pressed when error

occurs. Configuration options: [Disabled] [Enabled]

Summary of Contents for AS-D592











































































Search results

Summary of Contents for AS-D592

Reviews:

Related manuals for AS-D592

Brands by name

Popular brands

Asus AS-D592, User Manual

Search results

Summary of Contents for AS-D592

Reviews:

Related manuals for AS-D592

Brands by name

Popular brands