ASUS BP5220/AS-D592
3-21
DRAM Frequency [Auto]
Allows you to set the DDR2 operating frequency.
Configuration options (for 1600MHz FSB CPU): [Auto] [800MHz] [960MHz]
[1000MHz] [1200MHz]
Configuration options (for 1333MHz FSB CPU): [Auto] [667MHz] [800 MHz] [1000
MHz] [1110MHz]
Configuration options (for 1066MHz FSB CPU): [Auto] [667MHz] [800 MHz] [1066
MHz]
Configuration options (for 800MHz FSB CPU): [Auto] [667MHz] [800 MHz]
Selecting a very high DRAM frequency may cause the system to become
unstable! If this happens, revert to the default setting.
Memory Over Voltage [Auto]
Manually set memory voltage or set to Auto for safe mode.
Configuration options: [Auto] [1.85000] [1.85625] [1.86250] ...[2.24375]
1.25V Over Voltage [Auto]
Manually set MCH Chipset Voltage or set to Auto for safe mode.
Configuration options: [Auto] [1.25V] [1.40V]
Overclock Options [Overclock 5%]
Allows selection of CPU overclocking options to achieve desired CPU internal
frequency. Configuration options: [Overclock 5%] [Overclock 10%] [Overclock 15%]
[Overclock 20%] [Overclock 30%]
CPU Frequency [xxx]
Displays the frequency sent by the clock generator to the system bus and PCI bus.
The value of this item is auto-detected by the BIOS. Use the
<+>
and
<->
keys to
adjust the CPU frequency. You can also type the desired CPU frequency using the
numeric keypad. The values range from 200 to 600. Refer to the table below for
the correct Front Side Bus and CPU External Frequency settings.
The following item appears only when you set the AI Overclocking item to
[Overclock Profile].
