Asus AP2400R-E2, Service Manual

Page: 60 / 128

C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s
C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s
C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s 3 - 4 3 - 4
3 - 4 3 - 4
3 - 4
3.3 Attaching the rack rails
To attach the rack rails:
1. Select two units of space (2U) on the rack where you want to install
the barebone server.
2. Install the nuts on the holes of the 2U space on the rack front.
3. Install the nuts on the holes of the 2U space on the corresponding
rack rear.
4. Measure the depth of the rack to
determine the length of the rack
rails.
5. Take two pieces of rack rail,
consisting of the middle piece
with the pre-installed rear end,
and one front end (left or right).
Attach the front end to the
middle piece using the supplied
nuts and screws. Make sure that
the front end dent supports the
middle piece.
7. Measure the rack rail when
assembled to make sure that it
fits the rack.
R i g h t f r o n t R i g h t f r o n t R i g h t f r o n t R i g h t f r o n t R i g h t f r o n t
o f t h e r a c k
o f t h e r a c k o f t h e r a c k o f t h e r a c k o f t h e r a c k
L e f t f r o n t L e f t f r o n t L e f t f r o n t L e f t f r o n t L e f t f r o n t
o f t h e r a c k
o f t h e r a c k o f t h e r a c k o f t h e r a c k o f t h e r a c k
D e n t D e n t D e n t D e n t D e n t
M i d d l e p i e c e M i d d l e p i e c e M i d d l e p i e c e M i d d l e p i e c e M i d d l e p i e c e