17
IV. Hardware Setup
AP200 Hardware Reference Guide
IV
. HW Setup
4-1. Chassis
Removing the Left Panel
The left panel needs to be removed to gain access to the internal system.
Left Panel Removal Procedure:
1.
Remove the padlock if one is used on the left panel.
2.
Remove the thumb screw on the back of the left panel.
3.
Pull the left panel away from the chassis from the back.
4.
Pull the bottom of the left panel outward from the bottom.
Pulling the Left Panel Backward
(Step 3)
Pulling the Bottom of the Left Panel
(Step 4)
Thumb Screw
Location
Installing the Left Panel
Left Panel Installation Procedure:
1.
Hang the left panel on the hooks by the edge of the top panel. When
hooked, the left panel is still about 1.5cm away from the front panel.
2.
Push the bottom of the left panel inward.
3.
Slide the left panel towards the front panel.
To protect the server chassis from unauthorized intrusion, you may lock the
left panel with a padlock.
Chassis
