WL-AM602 Combo Router User Manual
24
LAN
USB
ACT
STATUS
POWER
5. Check if the settings are right. Click
Save
to save the new settings.
6. Click
Finish
.
A
DSL Router Reboot
screen appears. The router reboots to activate the new settings.
LAN
Configure the DSL Router IP address and Subnet Mask. If you want the DHCP server
to automatically assign IP addresses, then select
Enable DHCP Server
and enter the
range of IP addresses that the DHCP server can assign to your computers. Select
Disable DHCP Server
if you would like to manually assign IP addresses. Click
Next
to
continue. The
Save
button only saves the LAN configuration data, but does not apply
the configurations. Click
Save/Reboot
to save and activate the new settings.
