ASUS AM1M-A
1-17
3.
Serial ATA 6.0 Gb/s connectors (7-pin SATA6G 1~2)
These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard disk
drives and optical disc drives.
•
These connectors are set to AHCI mode by default. If you intend to create a Serial ATA
RAID set using these connectors, set the type of the SATA connectors in the BIOS to
[RAID]
. See section
2.6.2 SATA Configuration
for details.
•
You must install Windows
®
XP Service Pack 3 or later version before using Serial ATA
hard disk drives.
•
When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to
[AHCI]
. See section
2.6.2 SATA Configuration
for details.
4.
TPM connector (20-1 pin TPM)
This connector supports a Trusted Platform Module (TPM) system, which can securely
store keys, digital certificates, passwords, and data. A TPM system also helps enhance
network security, protects digital identities, and ensures platform integrity.
SATA6G_1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
SATA6G_2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
AM1M-A
AM1M-A SATA 6.0Gb/s connectors
The TPM module is purchased separately.
AM1M-A
AM1M-A TPM connector
PIN 1
TPM
SB_SUS_STAT GND +3VSB SMBSCL LAD0 +3V LAD3 PCIRST# FRAME PCICLK
RESET
GPIO
SERIRQ SMBSDA
GND LAD1 LAD2
PWROWN
GND
