Chapter 3
–
OS Flash guide
22
Co
mp
act
Fan
less
E
mb
ed
ded
AI@
Ed
ge
Bo
x
PC
BO
XE
R-
8250
AI
3.2 Connecting to PC/Force Recovery Mode
On Host Computer, open Linux terminal and enter the following command to extract
compressed OS image files (
file name may vary
):
$ tar -zxvf ACLinux_4.9_ACLNX49D.NV05.BOXER-8250AI.2.tar.gz
Next, perform the following steps to force the system to start in USB Recovery Mode:
1.
Connect the Micro-USB plug on the USB cable to the Recovery Port on the
BOXER-8250AI and the other end to an available USB port on the host PC.
2.
Connect the BOXER-8250AI power supply.
3.
Press and hold the recovery key button. While holding the recovery key button,
power on the system, and continue to hold the recovery key button for two
seconds, then release. The BOXER-8250AI should enter recovery mode.
4.
When device is in recovery mode, lsusb command on host PC will list a line of
“0955:7e19 Nvidia Corp”
Recovery mode can also be initiated with the system disassembled. Ensure the NVIDIA
Jetson Xavier NX module is installed and refer to the image below to perform the steps:
Summary of Contents for AAEON BOXER-8250AI
Page 16: ...Compact Fanless Embedded AI Edge Box PC BOXER 8250AI Chapter 2 Chapter 2 Hardware Information ...
Page 25: ...Chapter 2 Hardware Information 14 Compact Fanless Embedded AI Edge Box PC BOXER 8250AI ...
Page 31: ...Compact Fanless Embedded AI Edge Box PC BOXER 8250AI Chapter 3 Chapter 3 OS Flash Guide ...
