Asus A8S-X User Manual Download

Page: 67 / 78

ASUS A8S-X SE

2-27

2.6.2 Boot Settings Configuration

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some Power On Self Tests (POST)

while booting to decrease the time needed to boot the system. When set

to [Disabled], BIOS performs all the POST items. Conﬁguration options:

[Disabled] [Enabled]

Full Screen Logo [Enabled]

Allows you to enable or disable the full screen logo display feature.

Conﬁguration options: [Disabled] [Enabled]

Add On ROM Display Mode [Force BIOS]

Sets the display mode for option ROM.

Conﬁguration options: [Force BIOS] [Keep Current]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock.

Conﬁguration options: [Off] [On]

PS/2 Mouse Support [Auto]

Allows you to enable or disable support for PS/2 mouse.

Conﬁguration options: [Disabled] [Enabled] [Auto]

Wait for ʻF1ʼ If Error [Enabled]

When set to Enabled, the system waits for F1 key to be pressed when error

occurs. Conﬁguration options: [Disabled] [Enabled]

Hit ʻDELʼ Message Display [Enabled]

When set to Enabled, the system displays the message “Press DEL to run

Setup” during POST. Conﬁguration options: [Disabled] [Enabled]

Make sure that the above item is set to [Enabled] if you wish to use the

ASUS MyLogo™ feature.

Boot Settings Conﬁguration

Quick Boot

[Enabled]

Full Screen Logo

[Enabled]

AddOn ROM Display Mode

[Force BIOS]

Bootup Num-Lock

[On]

PS/2 Mouse Support

[Auto]

Wait for ‘F1’ If Error

[Enabled]

Hit ‘DEL’ Message Display

[Enabled]

Interrupt 19 Capture

[Disabled]

Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.

Summary of Contents for A8S-X















































































Search results

Summary of Contents for A8S-X

Reviews:

Related manuals for A8S-X

Brands by name

Popular brands

Asus A8S-X, User Manual

Search results

Summary of Contents for A8S-X

Reviews:

Related manuals for A8S-X

Brands by name

Popular brands