manualshive.com logo in svg

Asus A7VI-VM, User Manual

Share
Download
Asus A7VI-VM User Manual Download Page 27

ASUS A7VI-VM User’s Manual

27

3. HARDWARE SETUP

 Connectors

3. H/W SETUP

6) Parallel Port Connector (Burgundy 25-pin PRINTER)

You can enable the parallel port and choose the IRQ through Onboard Parallel
Port (see 4.4.2 I/O Device Configuration).

NOTE: Serial printers must be connected to the serial port.

Parallel (Printer) Port (25-pin female)

8) Audio Port Connectors  (Three 1/8” GAME_AUDIO) (optional)

Line Out (lime) can be connected to headphones or preferably powered speak-
ers. Line In (light blue) allows tape players or other audio sources to be re-
corded by your computer or played through the Line Out (lime). Mic (pink)
allows microphones to be connected for inputting voice.

Mic

Line In

Line Out

1/8" Stereo Audio Connectors

7) Game/MIDI Connector (Gold 15-pin GAME_AUDIO) (optional)

You may connect game joysticks or game pads to this connector for playing
games. Connect MIDI devices for playing or editing professional audio.

Joystick/MIDI (15-pin female)

Summary of Contents for A7VI-VM

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands