ASUS A7V600-F motherboard user guide
4-23
SDRAM RAS to CAS Delay
(value depends on SDRAM SPD)
This item controls the latency between the DDR SDRAM active command
and the read/write command. Configuration options: [5T] [4T] [3T] [2T].
SDRAM RAS Precharge Delay
(value depends on SDRAM SPD)
This item controls the idle clocks after issuing a precharge command to
the DDR SDRAM. Configuration options: [5T] [4T] [3T] [2T]
SDRAM Active Precharge Delay
(value depends on SDRAM SPD)
This item controls the number of DDR SDRAM clocks used for DDR
SDRAM parameters. Configuration options: [9T] [8T] [7T] [6T]
SDRAM 1T Command Control
Configuration options: [Disabled] [Enabled] [Auto]
SDRAM Bank Interleave
Configuration options: [Disabled] [2 Bank] [4 Bank] [Auto]
Graphics Aperture Size [64MB]
This feature allows you to select the size of mapped memory for AGP
graphic data. Configuration options: [8MB] [16MB] [32MB] [64MB]
[128MB] [256MB] [512MB] [1024MB]
AGP Capability [Auto]
This motherboard supports the AGP 8X interface that enables enhanced
graphics performance with high bandwidth speeds up to 2.12GB/s.
AGP8X is backward-compatible. When set to [1X Mode], the AGP
interface only provides a peak data throughput of 266MB/s even if you are
using an AGP 8X card.
Configuration options: [Auto] [1X Mode] [2X Mode] [4X Mode] [8X Mode]
AGP performance control [Disabled]
Configuration options: [Disabled] [Enabled]
AGP Fast Write control [Disabled]
Configuration options: [Disabled] [Enabled]
The [1024MB] and [512MB] configuration options are available only
when you use AGP 8X graphics card.
Summary of Contents for A7V600-F
Page 1: ...Motherboard A7V600 F User Guide ...
Page 12: ...xii ...