2-14
Chapter 2: Hardware information
2.7
Jumpers
1. Keyboard power (3-pin KBPWR)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the
computer when you press a key on the keyboard (the default value is
[Disabled]). This feature requires an ATX power supply that can supply
at least 1A on the +5VSB lead, and a corresponding setting in the
BIOS (see section 4.5.1 Power Up Control).
A7V600-F
®
A7V600-F Keyboard Power Setting
(Default)
+5V
+5VSB
KBPWR
2 3
1 2
A7V600-F
®
A7V600-F 1394 Setting
1394_SW
Enable
(Default)
Disable
2
1
2 3
2. IEEE 1394 Setting (3-pin 1394_SW)
This jumper permits selection of the IEEE 1394 onboard connector for
connection of the IEEE 1394 module. The default setting [1-2] enables
the onboard IEEE 1394 connector. Disable the connector by changing
the jumpers to [2-3].
Summary of Contents for A7V600-F
Page 1: ...Motherboard A7V600 F User Guide ...
Page 12: ...xii ...