Asus 90IG04K0-BU9100 User Manual Download

Page: 102 / 127

102

• If there is still no Internet access, try to reboot your computer

and verify the network’s IP address and gateway address.

• Check the status indicators on the ADSL modem and the

wireless router. If the WAN LED on the wireless router is not ON,

check if all cables are plugged properly.

You forgot the SSID (network name) or network password

• Setup a new SSID and encryption key via a wired connection

(Ethernet cable). Launch the web GUI, go to

Network Map

click the router icon, enter a new SSID and encryption key, and

then click

Apply

• Reset your router to the default settings. Launch the web GUI,

go to

Administration

Restore/Save/Upload Setting

, and

click

Restore

. The default login account and password are both

“admin”.

How to restore the system to its default settings?

• Go to

Administration

Restore/Save/Upload Setting

, and

click

Restore

The following are the factory default settings:

User Name:

admin

Password:

admin

IP address:

router.asus.com

SSID (2.4GHz):

Refer to the label at the bottom of the

router

SSID (5GHz):

Refer to the label at the bottom of the

router

Firmware upgrade failed.

Launch the rescue mode and run the Firmware Restoration utility.

Refer to section

5.2 Firmware Restoration

on how to use the

Firmware Restoration utility.

Summary of Contents for 90IG04K0-BU9100
































































































































Search results

Summary of Contents for 90IG04K0-BU9100

Reviews:

Related manuals for 90IG04K0-BU9100

Brands by name

Popular brands

Asus 90IG04K0-BU9100, User Manual

Search results

Summary of Contents for 90IG04K0-BU9100

Reviews:

Related manuals for 90IG04K0-BU9100

Brands by name

Popular brands